Anti-riot anti-stab clothing

Features:

1. Structure: anti-riot of the chest, back, limb protective layer are made of engineering plastic molding armor and soft energy materials made of crotch using 2.5mm thick aluminum and a layer of foam made of a layer;

2. Material: non-toxic flame retardant material PA6 + PC board (chest, back);

3. Quality: anti-riot service as the basic anti-riot service, the total mass of 7.72kg;

4. Specifications: anti-riot clothing specifications in line with 165cm-185cm high police officers wearing, the user can according to their own height with the connection with self-regulation;

5. Protection area: chest and crotch ≥ 0.1m2, back ≥ 0.1m2, upper limb (by limbs) ≥ 0.1 ㎡, lower limbs (according to the limbs, including the instep) ≥ 0.1m2;

6. Structure connection strength: the socket strength> 500N, Velcro buckle strength> 7.0N / cm2, with a strong band> 2000N;

7. Anti-thorn performance: anti-riot chest, back and front crotch (not including patchwork) with GA68 standard test tool to 20J kinetic energy vertical piercing protective parts, the tip does not penetrate the protective parts;

8. Impact resistance: the anti-riot arbitrary protective parts placed on a rigid plane to 120J energy impact, the corresponding parts without damage, cracking;

9. Hit the energy hit the energy absorption performance: the anti-riot of the chest, back parts were placed on the standard cement, the impact of 100J energy, cement indentation depth of 10.3mm;

10. High temperature anti-thorn performance: the anti-riot into the temperature of +55 ℃ ± 2 ℃ in the incubator to maintain 4h, the anti-stabbing performance test, the tip does not penetrate the protective parts;

11. Low temperature anti-thorn performance: the anti-riot into the temperature -20 ℃ ± 2 ℃ in the incubator to maintain 4h, the anti-stab resistance test, the tip does not penetrate the protective parts;

12. High temperature impact resistance: the anti-riot into the temperature of +55 ℃ ± 2 ℃ in the incubator for 4h, the impact resistance test, the corresponding parts without damage and cracking phenomenon;

13. Low temperature impact resistance: the anti-riot into the temperature -20 ℃ ± 2 ℃ in the incubator for 4h, the impact test, the corresponding parts without damage and cracking phenomenon;

14. Flammability: anti-riot protective parts of the surface after the burning of the duration of not more than 10S.